Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Flow through sensors for your TireMinder TPMS let you monitor the tire pressure of your RV, camper, or trailer. The flow-through design allows you to inflate or deflate your tires without removing them from the valve stems.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up, everybody It's AJ with etrailer.com. Today, we're gonna be checking out this TireMinder tire pressure sensor. So, this is gonna be a replacement for one that broke or got lost, or if you're adding an additional one to your system. Let's check it out. So, this is gonna be a flow through tire pressure sensor. I really like that aspect of it, that you can unthread the cap and fill up the tire with this still on here.
On the other TireMinder versions they don't have that, so you'd have to completely remove the sensor every time you need to put air in the tire, which not that big a deal to unthread it but still, it's easier just to leave it on there and check out your monitor to see how much air is in the tire. So, you're gonna unthread the cap here. You're gonna get a battery with this, it's gonna come in a quantity of two so you get two batteries and two sensors. You're gonna slide that battery in there. That's what activates it.
Thread that back on and now, you can use the app on your phone or the monitor to add the new sensor in, to add it to what tire you want it on. Now, with the two transmitters you're gonna get two locking nuts that thread onto the valve as well. And that's gonna help somebody not just take it off the valve when you're not around. You need a special tool to do it. So, we'll get that threaded on first, then thread on the transmitter, then bring the nut up to the transmitter, and then give it a couple turns with the special tool.
And now, you can't unthread. Now, these flow through tire pressure sensors are gonna work with TM76FR, TM86FR, TM38FR, and TM98FR. Now, with the battery in here, it says it can last from nine to 14 months. You're not gonna worry about it for a while and we also do sell the spare batteries for the sensor, so you can pick those up on our website just in case. Overall, I like how easy it is to add an additional sensor or replace one on your system.
Also, the flow through is really nice so I don't have to unthread this every time. I just remove the cap to add the air and monitor it as I'm doing that. Well, I think that does it. Thanks for hanging out and hope this helps.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews

Randall
3/11/2025
Fantastic! I can fill with the TPMS reading right on my monitor as I fill. Saves tie. And having to remove the TPMS check with a tire gauge reinstall TPMS or adjust pressure again, check again, etc…


Katrina D.
11/18/2023
Oh no, that is not good at all. I wouldn't necessarily rule out flow through sensors quite yet. It could definitely be a defective sensor, and these do have a three year warranty. Let me get you over to our customer service department for them to look into a warranty for you.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Leonard
12/11/2025
After a year, still problems or issues. I would definitely recommend and I would purchase again.